155Mbps Multimode To Single-mode Converter 1000Base-LX and WDM

Home »
155Mbps Multimode To Single-mode Converter 1000Base-LX and WDM

The converter is used to convert a Single-mode fiber signals to a Multimode equivalent that extends the long span fiber connections easily and inexpensively. Gigabit Ethernet supports a long wave 1000Base-LX and WDM fiber network. This media converter can be installed as a standalone unit or as a slide-in module to the 19"converter rack (up to 14 units) for use at a central hub.

Product Features

Easy Intergration
Cost Effective
Solid and highly durable construction
Allows for the conversion between Single-mode fiber and Multimode fiber or simply extending fiber transmission distances
The wavelength may be 850nm, 1310nm or 1550nm

Mode	Multimode to Single-mode
Maximum Distance	120km Single-mode
Operating Temperature	0 - 70°C
Input Power	2A +5V, Comes with 115V Adapter
Height	26.2mm
Width	70mm
Depth	94mm

You may also be interested in the following product(s)

14 Port Chassis Media Converter, 110V (Dual Power) Plug-and-Play with Hot-Swap Features

Ethernet to Fiber Converter, Single-mode SC, 80km 10/100TX to 100FX

Gigabit Media Converter, Single-mode SC, 80km 1000BASE-TX to 1000BASE-FX

Ethernet to Fiber Converter, Single-mode SC, 80km 10/100TX to 100FX

Use spaces to separate tags. Use single quotes (') for phrases.

Warranty Service:
FirstFiber warrants to the purchaser that our products shall be free from defects in material and workmanship under normal use (consumables, normal tear and wear excluded) for a period of one year from the date of shipment. Any part which is determined by FirstFiber to be defective in material or workmanship shall be returned to FirstFiber or authorized service location, as FirstFiber designates and shipping costs prepaid. Defective items will be repaired or replaced at FirstFiber's option.

ISO9001:2008

The certificate shows that a component/subsystem can be used in a specific application according to a requirement class (RC) or a integrity level (SIL). The system integrator and end user must always be aware of how to use certified components/subsystems in safety-related function, respectively a safety instrumented system. Because of the many different possibilities and how to configure a safety system, the end user must get the related information from the manufacturer of the certified component/subsystem.

The CE marking is a mandatory European marking for certain product groups to indicate conformity with the essential health and safety requirements set out in European. To permit the use of a CE mark on a product, proof that the item meets the relevant requirements must be documented.

RoHS

Working in partnership with the policy lead at BERR (The Department for Business, Enterprise & Regulatory Reform), NWML is the UK Enforcement Authority for the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2008 (the “RoHS Regulations”). Manufacturers need to understand the requirements of the RoHS Directive to ensure that their products, and their components, comply.

FCC

The Federal Communications Commission (FCC) is an independent United States government agency. The FCC was established by the Communications Act of 1934 and is charged with regulating interstate and international communications by radio, television, wire, satellite and cable. The FCC's jurisdiction covers the 50 states, the District of Columbia, and U.S. possessions.