It is an indoor optical terminal box that used in single-mode optical fibre networks for FTTH. It implements the connection between the feeder network of the service operators and the (vertical) distribution network within the building. The box allows sharing with other carriers the distribution and dispersion networks installed by the first carrier.
The box divides into two areas: The left area is for cable fibers splicing, storing and splitting. The right area is for connection of patch cords. Each area has an independent door, which can be locked by a triangular key.
The box is a cuboid box with modular design. It can be stacked together to use. Usually the upmost one is for building network. The followed ones are for operator network.
Features
- Material: PC+ABS, wet-proof, water-proof, dust-proof, anti-aging, protection level up to IP30.
- Optical cables access left with lashing system.
- Integrating fiber splicing, coupling and stirring in one box.
- Separate compartments for splicing and patching. Each compartment is equipped with a triangle key system.
- Distribution panel can be flipped up, easy for maintenance and installation.
- This box can be installed by the way of wall-mounted, suitable for indoor uses.
Dimensions and Capability |
|
Adapter Capacity |
SC simplex 48 cores |
Dimensions (W*H*D) |
450mm*182mm*150mm |
Number of Cable Entrance/Exit Ports |
3 |
Diameter of Fiber Cable |
Max diameter 18mm |
Capacity of Splice Tray |
8F |
Optional Accessories |
Adapters, pigtails, heat shrink tubes |
Operation Conditions |
|
Working Temperature |
-25℃ to +55℃ |
Relative Humidity |
5% to 95% |
Atmospheric pressure |
70kPa to 106kPa |
Warranty Service:
FirstFiber warrants to the purchaser that our products shall be free from defects in material and workmanship under normal use (consumables, normal tear and wear excluded) for a period of one year from the date of shipment. Any part which is determined by FirstFiber to be defective in material or workmanship shall be returned to FirstFiber or authorized service location, as FirstFiber designates and shipping costs prepaid. Defective items will be repaired or replaced at FirstFiber's option.
![]() |
ISO9001:2008 The certificate shows that a component/subsystem can be used in a specific application according to a requirement class (RC) or a integrity level (SIL). The system integrator and end user must always be aware of how to use certified components/subsystems in safety-related function, respectively a safety instrumented system. Because of the many different possibilities and how to configure a safety system, the end user must get the related information from the manufacturer of the certified component/subsystem. |
![]() |
CE The CE marking is a mandatory European marking for certain product groups to indicate conformity with the essential health and safety requirements set out in European. To permit the use of a CE mark on a product, proof that the item meets the relevant requirements must be documented. |
|
![]() |
RoHS Working in partnership with the policy lead at BERR (The Department for Business, Enterprise & Regulatory Reform), NWML is the UK Enforcement Authority for the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2008 (the “RoHS Regulations”). Manufacturers need to understand the requirements of the RoHS Directive to ensure that their products, and their components, comply. |
![]() |
FCC The Federal Communications Commission (FCC) is an independent United States government agency. The FCC was established by the Communications Act of 1934 and is charged with regulating interstate and international communications by radio, television, wire, satellite and cable. The FCC's jurisdiction covers the 50 states, the District of Columbia, and U.S. possessions. |